Eps profile coating machine are working on coating mortar on the surface of eps foam profiles.The motor motions the chain to drive the eps profiles on the chain thru the molding in the middle which is filled with mortar. Bigger coating width requires stronger chain drive. Molding can be adjusted a little bit by ball type screw,it can save time than other type design.
Thickness of coating material is as much as space between model moulds and the surface of the foam produces which had been cut. For example, if the space between your model foam which had been cut and model mold which belongs this produce is 2 mm you should coat the surface of your produces with 2 mm mortar.
These blanks should be same for every produce for following costs and manufacturing in good quality produce always. So, it is very important the quality of foam coating machine you to buy. You should have a machine which has iron body, power and which never shiver, for manufacturing produce in good quality always and for preventing hidden manufacturing costs.
- 0086 13833131292
- 0086 311 86558425