Performance of eps foam machine
The eps foam machine is designed and produced in combination with China's national conditions. It is a kind of equipment for producing insulation products in building insulation wall. It can not only provide users with eps board equipment synchronized with domestic and foreign countries, but also provide market analysis of eps board, selection of raw materials, production technology and application technology after production. We have a wide range of equipment specifications and flexible constructions ranging from 5 tons to 8 tons.
The electrical control system has both automatic and manual operation modes. Users can choose compact, tower, horizontal or stepped production lines according to actual plant conditions and product types.
The complete set of eps foam machine is mainly composed of lifting system, mixer system, storage bin system, packaging system machine, dust removal system and so on.The mixing system can be equipped with a double-shaft gravity-free paddle mixer or a high-efficiency double-layer intensive mixer. It has the advantages of fast mixing speed and high mixing precision. The net capacity of the single machine is 0.5--10 cubic meters. The mixer machine is different according to the application field. Made of ordinary carbon steel, stainless steel or wear-resistant steel. The mixing time is 60~120 seconds, and the ultimate mixing ratio of 1:10,00 or even higher can be stirred. Under the reasonable pushing speed of the stirring blade, the materials with large difference in specific gravity and particle size, such as polystyrene particles, cementing materials and chemical additives, are in an instantaneous weightless state, forming omni directional convection, diffusion and mutual shearing in the mixing cylinder. Quickly and gently achieve the effect of mixing evenly, without segregation and destruction of the original state of the material, ensuring that the thermal insulation coefficient of the eps board is not reduced by the shape destruction of the thermal insulation material, ensuring the thermal insulation effect of the product.
1. The quality of eps foam board equipment is high. The eps board equipment solves the problem that the traditional process preparation mortar ratio is difficult to grasp and affects the quality, and the measurement is very accurate and the quality is reliable. Because the eps board glue for different purposes has different requirements on the characteristics of anti-shrinkage, crack resistance, heat preservation and moisture resistance of the material, and the work ability, water retention and solidification time of the construction requirements are also different. These characteristics are required to be strictly formulated according to scientific formula, and only the production process of eps board can meet this requirement. Because of the accurate measurement and quality assurance, the quality of the project after using eps board glue is obviously improved, the construction period is obviously shortened, and the labor consumption is reduced.
2. It is easy to use and mix. The eps board is easy to use and can be stored for a long time. Just like eating instant noodles, with the mix and use, the remaining dry powder is used as a spare, economical use, no material waste, and eps board glue has a shelf life of 3 months.
3. Civilization construction is high and there is no environmental pollution. There is no gravel yard at the construction site, there is no residual material, no dust pollution caused by the mixing ofeps plates, and the air quality is improved. The eps board equipment adopts a modular structure, and the interior of the main building adopts anti-noise and dust removal measures to reduce the interference of dust pollution and noise on the surrounding environment. Sand does not need to be dried, no dry dust and soot pollution. Really a green product.
4. High productivity. Since the sand and the powder are separately mixed and stirred, the mixer only stirs the powder, which greatly improves the use efficiency of the mixer, and the output of the LY type double-mix dry-mix mortar production equipment can reach 100 tons/hour. At the same time, from the production of mortar to on-site construction, mechanized production can be fully realized, and the productivity is more than 9 times that of traditional manual construction.
5. Advanced control system. The control system has two modes of operation, automatic and manual, and has functions such as over-difference processing, automatic error correction, fault diagnosis, and alarm. The computer control is used to improve the reliability and safety of the control system. The equipment operation data can be automatically stored and can be called at any time. More than 1000 formulas can be stored, which greatly facilitates user use and supervision inspection. The operation room is luxuriously decorated and equipped with air-conditioning and air conditioning, which greatly improves the working environment of the operators.
- 0086 13833131292
- 0086 311 86558425