Home ›Products › Foam Recycling Machine

Without Heater!Still Shreds and Melts

Item No.: CO33539885

The polystyrene lumps recycling machine can shred with two shafts in the hopper and melts into lumps by its special chamber.

From the picture and video,you can see there is no heaters at chamber end.Cause it is different principle with traditional lumps machine.The machine produces heat by friction in the chamber.

how is quality of foam recycling machine

Benefits of 'Friction Produces Heat' for recycling foam materials

1) Almost needs no pre heating time,you can feed materials immediately after you turn on machine.Traditional lumps machine with heaters need about 20 minutes to heat chamber.

2) Almost no smoke to be produced.

3) Almost no smell to be produced.

4) Options to be with heater if the foam materials are wet.Cause heater can increase temperature to be higher inside chamber.

Question and Answer

Q: I have seen many melting machines with vertical hopper and two shafts in your catalog,what is the machine difference?

A: There are two major difference for this machine comparing to other machines.

1) There is no heater at chamber end.You can see other melting machines are with electric heater ring.

2) The two shafts and screw in chamber are driven by only one motor + reducer system.You can see other melting mahcines which shafts are driven by independent motors.

Q: What are the benefits for users?

A: There is no pre heating time to feed materials,cause it melts with friction.

It makes white color lump.It is important things,need to repeat that it makes white color lump...

Q: Is it competitive as for the machine price?

A: It is affordable and welcome to ask us for price.

polystyrene lumps recycling machine, polystyrene lumps , polystyrene lumps machine

Prev: 7.5kw EPS Polystyrene Hot Melt Machine

Next: 220V 4kw Motor Power | Small EPS Thermocol Melting Machine