News

What kind of blower is good to convey EPS particles/scraps?

A good blower is needed to convey EPS particles during EPS foam process which happens at EPS insulation or packaging factory,a good blower also is needed to convey EPS recycled scraps which are produced at recycling factory.Overall,a blower is generally requested.

9-19 high pressure blower is a centrifugal EPS blower. It is widely used for conveying EPS materials. Its characteristics are small flow, high wind pressure, good exhaust and air supply effects. Most manufacturers on the market produce two series, A and D. A is a direct motor drive, and D is a coupling drive.

Blower Application

Generally used for high-pressure forced ventilation and exhaust in industries such as spraying, electroplating, radio, batteries, and glass manufacturing. It can also be widely used for conveying materials and gases.

Conditions of Use

1. Requirements for conveyed materials: The conveyed materials are non-corrosive, non-flammable and non-explosive, and free of sticky substances. The dust and hard particles contained in the media should not exceed 150mg/m3.

2. Medium temperature: generally not more than 50℃ (maximum not more than 80℃)

Structural form

1. 9-19 centrifugal blower is a single suction type with a forward curved impeller.

2. According to the different rotation directions of the impeller, the blower can be made into right-handed and left-handed directions. Looking from one end of the motor, the impeller rotates clockwise for a right-hand blower, indicated by "right"; counterclockwise for a left-hand blower, indicated by "left".

3. The outlet angle of the 9-19 centrifugal blower can be made into 6 angles: 0°, 45°, 90°, 135°, 180°, and 225°. my country's standard products are 0°, 45°, and 90°, and the remaining angles can be made according to user needs.

4. The transmission mode of the 9-19 centrifugal blower is A/D:

A type: direct motor drive, compact structure, simple maintenance. Machine No. 3.5~6.3# adopts this transmission mode

D type: coupling drive, the structure is a one-piece type: that is, the blower, transmission group and motor are all assembled on the same rigid base, thereby reducing the difficulty of customer installation and greatly shortening the construction period of on-site installation and commissioning. Machine No. 7.1# and above adopt this transmission mode.

Model	Motor Power	Voltage	Frequency	Speed	Air Flow	Pressure
Model	Motor Power	V	Hz	r/min	m³/h	Pa
9-19 3.15A	0.75KW-2P	380	50	2830	402-545	2223-2262
9-19 3.15A	1.1KW-2P	380	50	2830	617-832	2231-2017
9-19 3.55A	1.5KW-2P	380	50	2840	560-760	2545-2590
9-19 3.55A	2.2KW-2P	380	50	2840	860-1160	2554-2310
9-19 4A	2.2KW-2P	380	50	2840	824-1264	3584-3597
9-19 4A	3KW-2P	380	50	2870	1410-1704	3507-3253
9-19 4.5A	4KW-2P	380	50	2890	1174-2062	4603-4447
9-19 4.5A	5.5KW-2P	380	50	2900	2281-2504	4297-4112
9-19 5A	7.5KW-2P	380	50	2900	1610-2844	5697-5517
9-19 5A	11KW-2P	380	50	2900	3166-3488	5323-5080
9-19 5.6A	11KW-2P	380	50	2900	2622-3619	7182-7109
	15KW-2P	380	50	2900	3309-4260	7068-6755
	18.5KW-2P	380	50	2900	3996-4901	6954-6400
9-19 6.3A	18.5KW-2P	380	50	2900	3220-5153	9149-9055
	22KW-2P	380	50	2900	4455-6066	9003-8601
	30KW-2P	380	50	2900	5690-6978	8857-8148

Prev: What is EPS moulding machine ?

Next: How to edit your cut path at Devfoam program?

News

What kind of blower is good to convey EPS particles/scraps?

Product Category

Hot Items

Live Help

Friend Links