How to Wire Up the EPS granulating machine?
EPS granulating machine can make recycled EPS granules by melting EPS waste and extrude into strand and cut into EPS granules.Buyer needs to wire it up with temperature control box before machine working.
The EPS granulating machine in the video is combined type machine system for 1# and 2#.
1# means 1st stage of unit or host unit or primary unit or mother machine;
2# means 2nd stage of unit,or auxiliary unit or secondary unit or baby machine.They have different names,while as,they are same machine.
To better understand the process,we prepare a video as above Youtube link in the picture.The technician in the video talks like below:
Wire In: three lives wires at position ABC; one neutral wire at position N;
Wire Out for 1# : one live wire at position 1# ;neutral wire at position N;
Connect wires at two heater rings for two live wires and two neutral wires;and connect the control box.
Repeat the wiring for 2# of machine.heater rings with 220v switch.
The wiring on die head is parallel connection:one live wire and one neutral wire;Connect all of them on die head and then connect neutral wire at position N;then connect live wire at 2# heater of control box.
Two temperature probes at control box separately to connect with 1# and 2# point.
Myaid Machinery supply foam granulating machine from China,our machine can feed EPS hotmelt,EPS compact,EPS loose foam,the screen at filter die can be electricity replaced or no screen at all for some new machine models.
- Foam Dedusting Crusher - EPS De dust machine
- EPS pelletizing machine - strand die works without filtering screen
- CNC hot wire 2D cutting machine with wire oscillation
- hot wire CNC foam cutting machine with turntable for 2D/3D/4D models
- full automatic and continuous eps cutting line
- Premium Polystyrene Cutting Machine for EPS pads bricks and Sheets
- 0086 13833131292
- 0086 311 86558425